Instaloval jsem to dle tohoto navadu, ale skoro vubec se v tom neorientuji. Naistaloval iGO8 na Mio Moov 200 udajne jde, ale me se ani nedari se dostat do Win prostredi v Mio
4B) Mio Moov models only:
i. Create, in the root of your SD card, a folder with one of the following "Cobia" names, depending on your model (Note: filenames ARE case-sensitive):
* Moov 150 (European: Cobia_300L_32, North American: Cobia_300L_32_NA, Australian: Cobia_300L_32_AU)
* Moov 200 (European: Cobia_300_32, North American: Cobia_300_64_NA, Australian: Cobia_300_32_AU)
* Moov 200u (European: Cobia_300_64, North American: Cobia_300_64_NA, Australian: Cobia_300_64_AU)
* Moov 210 (European: Cobia_T300_32, North American: Cobia_T300_64_NA, Australian: Cobia_T300_32_AU)
* Moov 300 (European: Cobia_400_64, North American: Cobia_400_64_NA, Australian: Cobia_400_64_AU)
* Moov 310 (European: Cobia_T400_64, North American: Cobia_T400_64_NA, Australian: Cobia_T400_64_AU)
* Moov 330 (European: Cobia_410_64, North American: Cobia_410_64_NA, Australian: Cobia_410_64_AU)
* Moov 360 (European: Cobia_420_64, North American: Cobia_420_64_NA, Australian: Cobia_420_64_AU)
* Moov 370 (European: Cobia_T420_64, North American: Cobia_T420_64_NA, Australian: Cobia_T420_64_AU)
* Moov 500 (European: Cobia_500_64, North American: Cobia_500_64_NA, Australian: Cobia_500_64_AU)
* Moov 500 R2 (European: Cobia500R2, North American: Cobia500R2_NA, Australian: Cobia500R2_AU)
* Moov 510 (European: Cobia_T500_64, North American: Cobia_T500_64_NA, Australian: Cobia_T500_64_AU)
* Moov 580 (European: Cobia_T550_64, North American: Cobia_T550_64_NA, Australian: Cobia_T550_64_AU)
* Knight Rider: KITT_USA
Example: \Storage Card\Cobia_400_64_NA
If the above does not help you to find the correct folder to use, connect your Moov to your computer and...
a) If you have a file named "app_startup.txt" in the root of your flash drive...
Open it, scroll down to the very bottom and look for the line that starts with RunSDCardExecutable. That line will look something like this...
RunSDCardExecutable(SmartST_CE - Run()): CreateProcess(\Storage card\FOLDER\auto.exe) failed, error 2
...with FOLDER being the folder name that your device requires. Create that folder on your SD card.
b) If you have a file named "version.ini" on the flash drive in \Program Files\Navman\SmartST_CE\...
Open it, look under the [VersionInfo] section for the "Name" entry. Create that folder on your SD card.
c) If you have a file named device.xml in the root of the flash drive, open it in a text editor, look for a string that starts with "Mantas" and create a folder with that name on your SD card.
If, for whatever reason, the app_startup.txt, version.ini and device.xml methods do not work for you, read the firmware version listed (usually in white on black text) when you boot the device up and use the first code that comes after "Cobia." For example, the Moov360's firmware version starts with "COBIA 420", so the folder should start with "Cobia_420" (note the capitalized first letter, the following lower-case and the underscore). After that, for most devices, comes the amount of internal RAM, "_32" for 32MB devices and "_64" for 64MB devices. Finally, North American models append "_NA" on the end and Australian models append "_AU" on the end.
If nothing works for you, try re-formatting your SD card or using an entirely different card, then look for an answer in the forums at
www.gpspassion.comii. Next, copy MioAutoRun.exe, MioAutoRun.mscr and MortScript.exe to the Cobia folder that you just created and rename the first two to Auto.exe and Auto.mscr, respectively. If the first file is listed in the folder simply as "MioAutoRun" (no ".exe"), then rename the file simply as "Auto" (because it means that the ".exe" is already there and being hidden by the operating system).
iii. Skip to Step 5.